Vishay (SIP32429DN-T1-GE4) Power Load Switch, Programmable Current Limit,

Power Load Switch, Programmable Current Limit, Active High, 1 Output, 28V, 3.5A, DFN-10 Product Overview The SIP32429DN-T1-GE4 is a Load Switch with programmable current limit and slew rate control. The load switch that integrates multiple control features that simplify the design and increase the reliability of the circuitry connected to the switch. An internally generated gate drive voltage ensures good RON linearity over the input voltage operating range. It has a slew rate control circuit that controls the switch turn-on time to the value set by an external capacitor. When an OCP or an OTP fault condition is detected the FLG pin is pulled low. For this switch the fault flag will release 150ms after the fault condition is cleared and the switch will automatically turn on at the programmed slew rate. This device features a low voltage control logic interface which can be controlled without the need for level shifting. Programmable soft start Programmable current limit Over-temperature protection -40 to 85°C Temperature range Applications Computers & Computer Peripherals, Lighting, Imaging, Video & Vision, Consumer Electronics, Industrial, Communications & Networking Product Information Power Load Switch Type: High Side Input Voltage: 28V Current Limit: 3.5A On State Resistance: 0.056ohm Distribution Switch Case Style: DFN No. of Pins: 10Pins Thermal Protection: Yes On / Enable Input Polarity: Active High No. of Outputs: 1Outputs Operating Temperature Min: -40°C Operating Temperature Max: 85°C MSL: MSL 1 - Unlimited