Infineon (IR2130SPBF) Power Driver, 3 Phase Bridge, 10V-20V Supply

Power Driver, 3 Phase Bridge, 10V-20V Supply, 500mA Out, 425ns Delay, SOIC-28 Product Overview The IR2130SPBF is a high voltage/high speed power MOSFET and IGBT Driver with three independent high and low side referenced output channels. Proprietary HVIC technology enables ruggedized monolithic construction. Logic inputs are compatible with CMOS or LSTTL outputs, down to 2.5V logic. A ground-referenced operational amplifier provides analog feedback of bridge current via an external current sense resistor. A current trip function which terminates all six outputs is also derived from this resistor. An open drain FAULT signal indicates if an over-current or under-voltage shutdown has occurred. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use at high frequencies. The floating channels can be used to drive N-channel power MOSFETs or IGBTs in the high side configuration which operate up to 600 volts. Floating channel designed for bootstrap operation Tolerant to negative transient voltage dV/dt Immune Gate drive supply range from 10 to 20V Under-voltage lockout for all channels Over-current shutdown turns off all six drivers Independent half-bridge drivers Matched propagation delay for all channels Outputs out of phase with inputs Cross-conduction prevention logic Fully operational to +600V 2.5V Logic compatible Applications Consumer Electronics, Industrial Product Information No. of Channels: 6Channels Driver Configuration: 3 Phase Bridge Power Switch Type: MOSFET Supply Voltage Min: 10V Supply Voltage Max: 20V Driver Case Style: SOIC Input Type: Inverting IC Case / Package: SOIC No. of Pins: 28Pins Source Current: 250mA Input Delay: 675ns Output Delay: 425ns Sink Current: 500mA Operating Temperature Min: -40°C Operating Temperature Max: 125°C