Microchip (MCP1252-33X50I/MS) DC/DC Fixed Charge Pump Voltage Converter,

DC/DC Fixed Charge Pump Voltage Converter, 2 V to 5.5 V in, 3.3 V/120 mA out, MSOP-8 Product Overview The MCP1252-33X50I/MS is an inductor less, positive-regulated charge pump DC/DC Converter. The devices generate a regulated fixed (3.3 or 5V) or adjustable output voltage. They are specifically designed for applications requiring low noise and high efficiency and are able to deliver up to 120mA output current. The devices allow the input voltage to be lower or higher than the output voltage, by automatically switching between buck/boost operation. These charge pumps operate at a switching frequency of 650kHz and feature power saving shutdown pins, short-circuit protection, thermal shutdown and power-good pins that report out-of-regulation conditions. Low 60µA supply current in no load conditions High 2.5% voltage accuracy (on fixed voltage outputs) High 650kHz operation to avoid interference with IF bands Logic level shutdown control reduces current consumption to 0.1µA during standby operation Power-good output indicator with hysteresis Thermal shutdown protection with hysteresis Short-circuit protection Soft-start circuitry to minimize inrush current Applications LED Lighting, Consumer Electronics, Computers & Computer Peripherals, Automotive Product Information Output Type: Fixed Input Voltage Min: 2V Input Voltage Max: 5.5V DC / DC Converter IC Case: MSOP No. of Pins: 8Pins Output Current: 120mA Fixed Output Voltage Nom: 3.3V Topology: Buck, Boost Operating Temperature Max: 85°C Automotive Qualification Standard: AEC-Q100 MSL: MSL 1 - Unlimited