Stmicroelectronics (LD1086DT50TR) Fixed LDO Voltage Regulator, 8V to 30V

Fixed LDO Voltage Regulator, 8V to 30V, 1.3V Dropout, 5Vout, 1.5Aout, TO-252-3 Product Overview The LD1086DT50TR is an adjustable and fixed low drop Positive Voltage Regulator with 5V output voltage, it is capable of providing up to 1.5A of output current. Dropout is guaranteed at a maximum of 1.2V at the maximum output current, decreasing at lower loads. This is pin-to-pin compatible with older 3-terminal adjustable regulator, but has better performance in terms of drop and output tolerance. Unlike PNP regulators, where a part of the output current is wasted as quiescent current, the quiescent current flows into the load, increasing efficiency. Only a 10µF (minimum) capacitor is needed for stability. On-chip trimming allows the regulator to reach a very tight output voltage tolerance, within ±1% at 25°C. The PAT, SYL, SBL statistical tests have been performed and the device is qualified according to the AEC-Q100 specification for the automotive market in the temperature range of -40 to 125°C. Internal power and thermal limit -40 to 125°C Wide operating temperature range Pin out compatibility with standard adjustable voltage regulators Applications Automotive, Power Management Product Information Output Type: Fixed Input Voltage Min: 8V Input Voltage Max: 30V Fixed Output Voltage Nom: 5V Output Current: 1.5A Dropout Voltage Vdo: 1.3V LDO Regulator Case Style: TO-252 (DPAK) No. of Pins: 3Pins Operating Temperature Min: -40°C Operating Temperature Max: 125°C Product Range: 5V 1.5A LDO Voltage Regulators