Microchip (PIC18F2620-I/SP) 8 Bit MCU, Flash, 40 MHz, 64 KB, 28 Pins, NDIP

8 Bit MCU, Flash, PIC18 Family PIC18F26xx Series Microcontrollers, 40 MHz, 64 KB, 28 Pins, NDIP Product Overview The PIC18F2620-I/SP is an Enhanced Flash Microcontroller with 10-bit A/D and nanoWatt technology. The PIC18F2620 family introduces design enhancements that make these microcontrollers a logical choice for many high-performance and power sensitive applications. The PIC18F2620 family incorporates a range of features that can significantly reduce power consumption during operation. The PIC18F2620 device include an internal oscillator block which generates two different clock signals, either can be used as the microcontroller's clock source. This may eliminate the need for external oscillator circuits on the OSC1 and/or OSC2 pins. The PIC18F2620 microcontroller can be serially programmed while in the end application circuit. This is simply done with two lines for clock and data and three other lines for power, ground and the programming voltage. CPU - Up to 10 MIPS performance and C compiler optimized RISC architecture System - Watchdog timer with separate RC oscillator nanoWatt power managed modes - run, idle and sleep modes Analogue - 10 channels, 100kSPS and programmable brown-out reset module 100 years typical flash/data EEPROM retention Self-programmable under software control Priority levels for interrupts 8 x 8 single-cycle hardware multiplier In-Circuit Debug (ICD) via two pins Product Information Product Range: PIC18 Family PIC18F26xx Series Microcontrollers CPU Speed: 40MHz Program Memory Size: 64KB Operating Frequency Max: 40MHz RAM Memory Size: 3.9KB No. of Pins: 28Pins MCU Case Style: NDIP IC Case / Package: NDIP No. of I/O's: 25I/O's Embedded Interface Type: EUSART, I2C, SPI Interfaces: EUSART, I2C, SPI Supply Voltage Min: 4.2V Supply Voltage Max: 5.5V MCU Family: PIC18 MCU Series: PIC18F26xx Operating Temperature Min: -40°C Operating Temperature Max: 85°C IC Mounting: Through Hole MSL: MSL 1 - Unlimited