Microchip (MCP41010-I/SN) Volatile Digital Potentiometer, 10 kohm, Single

Volatile Digital Potentiometer, 10 kohm, Single, Serial, SPI, Linear, ± 20%, 2.7 V Product Overview The MCP41010-I/SN is a single channel, volatile digital potentiometer with 8bit resolution in 8 pin SOIC package. The wiper position varies linearly and is controlled via industry standard SPI interface. The MCP41010 has resistance value of 10Kohm, outstanding AC and DC characteristics and consumes less than 1µA during static operation. A software shutdown is provided that disconnects the "A" terminal from resistor stack and simultaneously connects wiper to "B" terminal. 256 taps for each potentiometer Low power CMOS technology Shutdown feature open circuits of all resistors for maximum power savings Single supply operation from 2.7V to 5.5V Operating temperature range from -40°C to 85°C Wiper resistance of 52ohm Differential and integral non linearity of ±1/4LSB -3dB bandwidth of 1MHz Settling time of 2µS Applications Audio, Motor Drive & Control, Communications & Networking, Power Management, Sensing & Instrumentation Product Information End To End Resistance: 10kohm No. of Pots: Single Control Interface: Serial, SPI Track Taper: Linear Resistance Tolerance: ± 20% Supply Voltage Min: 2.7V Supply Voltage Max: 5.5V Potentiometer IC Case Style: SOIC No. of Pins: 8Pins No. of Steps: 256 Temperature Coefficient: ± 800ppm/°C Operating Temperature Min: -40°C Operating Temperature Max: 85°C Product Range: Single 256-Tap Volatile Digital Pots MSL: MSL 1 - Unlimited