Stmicroelectronics (STM32F205RET6) ARM MCU, 32 bit, 120 MHz, 512 KB

ARM MCU, STM32 Family STM32F2 Series Microcontrollers, ARM Cortex-M3, 32 bit, 120 MHz, 512 KB Product Overview The STM32F205RET6 is a 32-bit ARM-based Microcontroller Unit features an adaptive real-time memory accelerator which allows to achieve a performance equivalent to 0 wait state program execution from flash memory at a CPU frequency up to 120MHz. It is based on the high-performance ARM® Cortex®-M3 32-bit RISC core operating at a frequency of 120MHz. This incorporates high-speed embedded memories up to 4kB of backup SRAM and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix. Clock, reset and supply management - POR, PDR, PVD and BOR Low-power modes - Sleep, stop and standby modes VBAT supply for RTC, 20 x 32-bit backup registers and optional 4kB backup SRAM General-purpose DMA - 16-stream controller with centralized FIFOs and burst support Debug mode - Serial wire debug (SWD), JTAG and Cortex-M3 embedded trace Macrocell™ 8 to 14-bit parallel camera interface CRC calculation unit 96-bit Unique ID Applications Motor Drive & Control, Medical, Computers & Computer Peripherals, Consumer Electronics, Communications & Networking, Industrial, Security, Imaging, Video & Vision, HVAC Product Information Product Range: STM32 Family STM32F2 Series Microcontrollers Device Core: ARM Cortex-M3 No. of Bits: 32bit Data Bus Width: 32bit Operating Frequency Max: 120MHz CPU Speed: 120MHz Program Memory Size: 512KB RAM Memory Size: 132KB IC Case / Package: LQFP No. of Pins: 64Pins MCU Case Style: LQFP No. of I/O's: 51I/O's Interfaces: CAN, I2C, SPI, UART, USART, USB Embedded Interface Type: CAN, I2C, SPI, UART, USART, USB Supply Voltage Min: 1.8V Supply Voltage Max: 3.6V MCU Family: STM32 MCU Series: STM32F2 Operating Temperature Min: -40°C Operating Temperature Max: 85°C MSL: MSL 3 - 168 hours