Stmicroelectronics (STM32F303CCT6) ARM MCU, General Purpose, 32 bit

ARM MCU, General Purpose, STM32 Family STM32F3 Series Microcontrollers, ARM Cortex-M4, 32 bit Product Overview ARM®-based Cortex®-M4 32bit MCU + FPU single-cycle multiplication and HW division, 90 DMIPS (from CCM), DSP instruction and MPU (memory protection unit). Supports CAN interface (2.0B Active), Two I2C fast mode plus (1Mbit/s) with 20mA current sink, SMBus/PMBus, wakeup from STOP, up to five USART/UARTs (ISO 7816 interface, LIN, IrDA, modem control), up to three SPIs, two with multiplexed half/full duplex I2S interface, 4 to 16 programmable bit frames, USB 2.0 full speed interface, infrared transmitter communication interfaces. Routine booster: 8Kbytes of SRAM on instruction and data bus with HW parity check (CCM) Reset and supply management (power-on/power-down reset, programmable voltage detector) low power modes: sleep, stop and standby Clock management (internal 8MHz RC with x 16 PLL option, internal 40KHz oscillator) Up to 87 fast I/Os, interconnect matrix, 12channel DMA controller Two 12bit DAC and 7 fast rail to rail analogue comparators Up to 24 capacitive sensing channels supporting touch key, linear and rotary touch sensors Up to 13 timers and 96bit unique ID Calendar RTC with alarm, periodic wakeup from stop/standby Serial wire debug, Cortex®-M4 with FPU ETM, JTAG Product Information Product Range: STM32 Family STM32F3 Series Microcontrollers Device Core: ARM Cortex-M4 No. of Bits: 32bit Data Bus Width: 32bit Operating Frequency Max: 72MHz CPU Speed: 72MHz Program Memory Size: 256KB RAM Memory Size: 40KB IC Case / Package: LQFP No. of Pins: 48Pins MCU Case Style: LQFP No. of I/O's: 20I/O's Interfaces: CAN, I2C, SPI, USART, USB Embedded Interface Type: CAN, I2C, SPI, USART, USB Supply Voltage Min: 2V Supply Voltage Max: 3.6V MCU Family: STM32 MCU Series: STM32F3 Operating Temperature Min: -40°C Operating Temperature Max: 85°C MSL: MSL 3 - 168 hours