Microchip (MCP3424-E/SL) Analogue to Digital Converter, Quad, 18 bit

Analogue to Digital Converter, Quad, 18 bit, 3.75 SPS, Differential, I2C, Single, 2.7 V Product Overview The MCP3424-E/SL is a 4-channel low-noise high accuracy delta-sigma A/D Converter with differential inputs and up to 18-bit of resolution. The on-board precision 2.048V reference voltage enables an input range of ±2.048V differentially. The device uses a two-wire I²C™ compatible serial interface and operates from a single power supply ranging from 2.7 to 5.5V. The MCP3424 device performs conversions at rates of 3.75, 15, 60 or 240 samples per second depending on user controllable configuration bit settings using the two-wire I²C™ compatible serial interface. The I²C™ address is user configurable with two address selection pins. This device has an onboard programmable gain amplifier (PGA). User can select the PGA gain of x1, x2, x4 or x8 before the analogue-to-digital conversion takes place. This allows the MCP3424 device to convert a smaller input signal with high resolution. The device has continuous and one-shot mode. Differential input operation Onboard voltage reference with 15ppm/°C drift Onboard PGA INL 10ppm of FSR maximum 135µA at 3V Low current consumption One-shot or continuous conversion options Onboard oscillator Applications Portable Devices, Consumer Electronics, Sensing & Instrumentation, Automation & Process Control Product Information Resolution (Bits): 18bit Sampling Rate: 3.75SPS Input Channel Type: Differential Supply Voltage Min: 2.7V Data Interface: I2C Supply Voltage Type: Single Supply Voltage Max: 5.5V ADC / DAC Case Style: SOIC No. of Pins: 14Pins Operating Temperature Min: -40°C Operating Temperature Max: 125°C Product Range: Quad 18-Bit Sigma-Delta ADCs MSL: MSL 1 - Unlimited