Microchip (MCP3221A5T-E/OT) Analogue to Digital Converter, 12 bit

Analogue to Digital Converter, 12 bit, 22.3 kSPS, Single Ended, I2C, Single, 2.7 V Product Overview The MCP3221A5T-E/OT is a successive approximation A/D Converter with 12-bit resolution. This device provides one single-ended input with very low power consumption. Based on an advanced CMOS technology, the MCP3221 provides a low maximum conversion current and standby current of 250 and 1µA respectively. Low current consumption, make this device ideal for battery-powered and remote data acquisition applications. Communication to the MCP3221 is performed using a 2-wire, I²C compatible interface. The converter with standard (100kHz) and fast (400kHz) I²C modes. An on-chip conversion clock enables independent timing for the I²C and conversion clocks. The device is also addressable, allowing up to eight devices on a single 2-wire bus. ±1 LSB DNL, ±2 LSB INL maximum 250µA Maximum conversion current 5nA Typical standby current, 1µA maximum 22.3kSPS in I²C fast mode Single-ended analogue input channel On-chip sample and hold On-chip conversion clock AEC-Q100 Grade 1 Applications Portable Devices, Test & Measurement, Power Management, Communications & Networking Product Information Resolution (Bits): 12bit Sampling Rate: 22.3kSPS Input Channel Type: Single Ended Supply Voltage Min: 2.7V Data Interface: I2C Supply Voltage Type: Single Supply Voltage Max: 5.5V ADC / DAC Case Style: SOT-23 No. of Pins: 5Pins Operating Temperature Min: -40°C Operating Temperature Max: 125°C Product Range: Single 12-Bit SAR ADCs MSL: MSL 1 - Unlimited