Microchip (MCP3002-I/SN) Analogue to Digital Converter, Dual, 10 bit

Analogue to Digital Converter, Dual, 10 bit, 200 kSPS, Pseudo Differential, Single Ended, Serial Product Overview The MCP3002-I/SN is a 10-bit Analogue-to-digital Converter combines high performance and low power consumption. The MCP3002 features a successive approximation register (SAR) architecture and an industry-standard SPI™ serial interface, allowing 10-bit ADC capability to be added to any PICmicro® microcontroller. The MCP3002 features 200kSPS, 2 input channels, low power consumption (5nA typical standby, 520µA typical active). Applications for the MCP3002 includes data acquisition, multi-channel data loggers and robotics. The MCP3002 is programmable to provide a single pseudo-differential input pair or dual single-ended inputs. Differential non-linearity (DNL) and integral non-linearity (INL) are both specified at ±1 LSB. Communication with the device is done using a simple serial interface compatible with the SPI protocol. The device is capable of conversion rates of up to 200kSPS at 5V and 75kSPS at 2.7V. 10-bit resolution ±1 LSB Maximum DNL ±1 LSB maximum INL Four single-ended channels On-chip sample and hold SPI serial interface (modes 0,0 and 1,1) 200kSPS Maximum sampling rate at VDD = 5V 75kSPS Maximum sampling rate at VDD = 2.7V Low power CMOS technology Applications Embedded Design & Development, Industrial, Sensing & Instrumentation, Test & Measurement, Computers & Computer Peripherals, Motor Drive & Control, Automation & Process Control, Portable Devices, Medical, Automotive Product Information Resolution (Bits): 10bit Sampling Rate: 200kSPS Input Channel Type: Pseudo Differential, Single Ended Supply Voltage Min: 2.7V Data Interface: Serial Supply Voltage Type: Single Supply Voltage Max: 5.5V ADC / DAC Case Style: SOIC No. of Pins: 8Pins Operating Temperature Min: -40°C Operating Temperature Max: 85°C Product Range: Single 10-Bit SAR ADCs MSL: MSL 1 - Unlimited