Onsemi (MC12093DG) Modulus Prescaler, 1.4 GHz, 2.7V-5.5V supply

Modulus Prescaler, 1.4 GHz, 2.7V-5.5V supply, 1 Output, SOIC-8 Product Overview The MC12093DG is a low power modulus Prescaler with stand-by mode for low power frequency division of a 1.1GHz high frequency input signal. MOSAIC V™ technology is utilized to achieve low power dissipation of 6.75mW at a minimum supply voltage of 2.7V. On-chip output termination provides output current to drive a 2pF (typical) high impedance load. If additional drive is required for the prescaler output, an external resistor can be added parallel from the OUT pin to GND to increase the output power. Care must be taken not to exceed the maximum allowable current through the output. Stand-by mode is featured to reduce current drain to 50A typical when the standby pin SB is switched LOW disabling the prescaler. -40 to 85°C Operating temperature range Applications Industrial Product Information Clock IC Type: Modulus Prescaler Frequency: 1.1GHz No. of Outputs: 1Outputs Supply Voltage Min: 2.7V Supply Voltage Max: 5.5V Clock IC Case Style: SOIC No. of Pins: 8Pins Operating Temperature Min: -40°C Operating Temperature Max: 85°C