Murata Power (MGJ2D052005SC) Isolated Through Hole DC/DC Converter,

Isolated Through Hole DC/DC Converter, Gate Drive, 1:1, 2 W, 2 Output, 20 V, 80 mA Product Information Power Supply Approvals: Gate Drive Output Power Max: 2W Input Ratio: 1:1 Output Voltage - Output 1: 20V Output Current - Output 1: 80mA No. of Outputs: 2 Output Output Voltage - Output 2: -5V Output Current - Output 2: 40mA Output Regulation: Unregulated Isolation Voltage: 5.2kV Input Voltage DC Min: 4.5V Input Voltage DC Max: 5.5V DC / DC Converter Output Type: Fixed Input Voltage DC Nom: 5V DC / DC Converter Type: SIP DC / DC Converter Mounting: Through Hole Width: 9.95mm Height: 12.65mm Depth: 19.65mm Product Range: MGJ Series Product Overview The MGJ2D052005SC is a 2-output 2W board-mount isolated gate-drive DC/DC Converter ideal for powering high-side and low-side gate drive circuits for IGBTs and MOSFETs in bridge circuits. A choice of asymmetric output voltages allows optimum drive levels for best system efficiency and EMI. The device is characterized for high isolation and dv/dt requirements commonly seen in bridge circuits used in motor drives and inverters, while the device industrial grade temperature rating and construction gives long service life and reliability. Ultra low coupling capacitance Characterised dv/dt immunity Characterised partial discharge performance Power density 0.81W/cm³ 5.2kVDC Isolation test voltage hi pot test 8% Maximum load regulation 50mVp-p Maximum ripple and noise 78.5% Typical efficiency 3.3pF Isolation capacitance 5.4ms Start-up time Applications Power Management, Industrial