Abb (F202B-25/0.3) Circuit Breaker, System pro M compact F200, 230 V

The RCCBs F200 series assures protection to people and installations against fault current to earth. This product is manufactured according to international IEC standards, for the markets where it is required. Product Information Product Range: System pro M compact F200 Voltage Rating VAC: 230V Current Rating: 25A No. of Poles: 2 Pole Insulation Voltage: 500V Technical: Standards:IEC/EN 61008 Type of Residual Current:B type Rated Voltage (Ur):230 V Rated Operational Voltage:230 V Rated Insulation Voltage (Ui):440 V Test Voltage (Ut):170-253 V AC Rated Impulse Withstand Voltage (Uimp):4 kV Dielectric Test Voltage:2500 V Input Voltage Type:AC Rated Current (In):25 A Rated Residual Current:300 mA Rated Residual Breaking Capacity (IΔm):1 kA Rated Conditional Short-Circuit Current (Inc):10 kA Impulse Current:I (max, 8 / 20 µs) 3000 A Maximum Surge Current:3 kA Rated Frequency (f):50 / 60 Hz Power Loss:1.58 W Electrical Endurance:10000 cycle Mechanical Endurance:20000 cycle Number of Poles:2 Number of Modular Spacings per DIN Rail:2 Operating Characteristic:Instantaneous (APR High Immunity) Overvoltage Category:III Tightening Torque:2.8 N·m Delay Time (τ):10 ms Accessory Type:Auxiliary contact, Signal contact/auxiliary contact, Shunt trip, Undervoltage release, Overvoltage release, Motor operating device, Auto reclosing unit Mounting Type:on DIN rail EN 60715 (35mm) by means of mounting clip Screw Terminal Type:Failsafe Bi-directional Cylinder-lift Terminal Options Provided:None Mounting Position:Any Accessories Available:Yes Number of Batteries:0 Cable Size:25 mm² Connecting Capacity:Busbar 10 mm² Flexible 1 ... 25 mm² Stranded 1 ... 25 mm² Rated Cross-Section:1 - Solid-Core 1 ... 25 mm² Wire Stripping Length:12 mm Terminal Type:Screw Terminals Environmental Ambient Air Temperature:Operation -25 ... +70 °C Degree of Protection:Housing IPX4 Terminals IP2X Pollution Degree:3 Environmental Conditions:28 cycles with 55 °C / 90-96 % and 25 °C / 95-100 % Resistance to Vibrations acc. to IEC 60068-2-6:0.1 mm or 1 g - 20 cycles at 5…150…5 Hz Resistance to Shock acc. to IEC 60068-2-27:25g / 2 shocks / 13 ms