Raspberry-Pi (RPI COMPUTE MODULE) Compute Module CM2835 Processor, 4GB eMMC

Product Information SOC Type: Broadcom BCM2835 Core Type: 32-bit ARM11 No. of Cores: 1 Core RAM Memory: 512MB LPDDR2 GPU: - CPU Speed: 1.5GHz eMMC: 4GB Compute Module Interface: I2C, SPI, UART, SD/SDIO, HDMI, NAND Wi-Fi Connectivity: - Bluetooth Connectivity: - Product Range: - Product Overview RPI COMPUTE MODULE is a compute module 1. The compute module is a Raspberry Pi in a more flexible form factor, intended for industrial application. The compute module contains the guts of a Raspberry Pi (the BCM2835 processor and 512MB RAM) as well as a 4GB eMMC Flash device (which is the equivalent of the SD card in the Pi). This is all integrated on to a small 67.6x30mm board which fits into a standard DDR2 SODIMM connector (the same type of connector as used for laptop memory). The flash memory is connected directly to the processor on the board, but the remaining processor interfaces are available to the user via the connector pins. Users get the full flexibility of the BCM2835 SoC (which means that many more GPIOs and interfaces are available as compared to the Raspberry Pi), and designing the Module into a custom system should be relatively straightforward as we’ve put all the tricky bits onto the Module itself. On board BCM2835 processor Board hosts GPIO pins, an HDMI port, a USB port, two camera ports and two display ports