Nexperia (74HC193PW,118) Binary Synchronous Up / Down Counter, 49 MHz

Binary Synchronous Up / Down Counter, 49 MHz, 2 V to 6 V, TSSOP-16 Product Overview The 74HC193PW is a 4-bit presettable synchronous Binary Up/Down Counter with separate up/down clocks, CPU and CPD respectively. The outputs change state synchronously with the low-to-high transition of either clock input. If the CPU clock is pulsed while CPD is held high, the device will count up. If the CPD clock is pulsed while CPU is held high, the device will count down. Only one clock input can be held high at any time to guarantee predictable behaviour. The device can be cleared at any time by the asynchronous master reset input (MR), it may also be loaded in parallel by activating the asynchronous parallel load input (PL\). The terminal count up (TCU\) and terminal count down (TCD\) outputs are normally high. When the circuit has reached the maximum count state of 15, the next high-to-low transition of CPU will cause TCU\ to go low. TCU\ will stay low until CPU goes high again, duplicating the count up clock. Asynchronous parallel load Asynchronous reset Expandable without external logic CMOS Input levels Complies with JEDEC standard No. 7A Product Information Logic Family / Base Number: 74HC193 Counter Type: Presettable Binary, Synchronous, Up / Down Clock Frequency: 49MHz Count Maximum: 15 Logic Case Style: TSSOP No. of Pins: 16Pins Supply Voltage Min: 2V Supply Voltage Max: 6V Logic IC Family: 74HC Logic IC Base Number: 74193 Operating Temperature Min: -40°C Operating Temperature Max: 125°C Product Range: - MSL: MSL 1 - Unlimited