Onsemi (MC14060BDG) Binary Ripple Counter, 17 MHz, 1 Gat

Binary Ripple Counter, 17 MHz, 1 Gate, 1 Input, 3 V to 18 V, SOIC-16 Product Overview The MC14060BDG is a 14-stage Binary Ripple Counter with an on-chip oscillator buffer. The oscillator configuration allows design of either RC or crystal oscillator circuits. Also included on the chip is a reset function which places all outputs into the zero state and disables the oscillator. A negative transition on Clock will advance the counter to the next state. Schmitt trigger action on the input line permits very slow input rise and fall times. Applications include time delay circuits, counter controls and frequency dividing circuits. This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high-impedance circuit. For proper operation, Vin and Vout should be constrained to the range VSS VDD. Unused inputs must always be tied to an appropriate logic voltage level. Unused outputs must be left open. Fully static operation Diode protection on all inputs Buffered outputs available from stages 4 through 10 and 12 through 14 Common reset line Pin-for-pin replacement for CD4060B Product Information Logic Family / Base Number: MC14060 Counter Type: Binary Clock Frequency: 17MHz Count Maximum: 16383 Logic Case Style: SOIC No. of Pins: 16Pins Supply Voltage Min: 3V Supply Voltage Max: 18V Logic IC Family: MC140 Logic IC Base Number: 4060 Operating Temperature Min: -55°C Operating Temperature Max: 125°C Product Range: -