Texas Instruments (CD4516BE) Binary Up / Down Counter, 11 MHz

Binary Up / Down Counter, 11 MHz, 3 V to 18 V, DIP-16 Product Overview The CD4516BE is a CMOS presettable binary Up/Down Counter consists of four synchronously clocked D-type flip-flops connected as counters. This counter can be cleared by a high level on the RESET line and can be pre-set to any binary number present on the jam inputs by a high level on the PRESET ENABLE line. If the CARRY-IN input is held low, the counter advances up or down on each positive-going clock transition. Synchronous cascading is accomplished by connecting all clock inputs in parallel and connecting the CARRY-OUT of a less significant stage to the CARRY-IN of a more significant stage. The CD4516B can be cascaded in the ripple mode by connecting the CARRY-OUT to the clock of the next stage. If the UP/DOWN input changes during a terminal count, the CARRY-OUT must be gated with the clock and the UP/DOWN input must change while the clock is high. This method provides a clean clock signal to the subsequent counting stage. Synchronous internal carry propagation Reset and Preset capability 100% Tested for quiescent current at 20V Standardized, symmetrical output characteristics Meets all requirements of JEDEC tentative standard #13B Applications Industrial Product Information Logic Family / Base Number: CD4516 Counter Type: Binary, Up / Down Clock Frequency: 11MHz Count Maximum: 15 Logic Case Style: DIP No. of Pins: 16Pins Supply Voltage Min: 3V Supply Voltage Max: 18V Logic IC Family: CD4000 Logic IC Base Number: 4516 Operating Temperature Min: -55°C Operating Temperature Max: 125°C Product Range: CD4000 LOGIC MSL: -