Arduino A000073 Development Board Arduino Uno SMD ATmega328 MCU

A000073 - Development Board, Arduino Uno SMD, ATmega328 MCU, 54 5V I/O, 16 Analogue Inputs, UART The A000073 is a Arduino Uno SMD R3 development board based on the ATmega328 microcontroller. The ATmega328 is a low power CMOS 8bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega328 achieves throughputs approaching 1MIPS per MHz allowing the system designer to optimize power consumption versus processing speed. The Arduino Uno SMD R3 evaluation board has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16MHz crystal oscillator, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller, simply connect it to a computer with a USB cable or power it with a AC to DC adapter or battery to get started. The Uno differs from all preceding boards in that it does not use the FTDI USB to serial driver chip. ATmega16U2 instead 8U2 as USB to serial converter Stronger RESET circuit 1.0 pinout Input voltage (recommended) range from 7V to 12V 5V operating voltage 32KB flash memory 0.5KB flash memory for bootloader 50mA of DC current for 3.3V pin 1KB EEPROM 2KB SRAM Applications Embedded Design & Development, Building Automation, Industrial, Sensing & Instrumentation, Automation & Process Control Silicon Manufacturer: Atmel No. of Bits: 8bit Silicon Family Name: ATmega Core Architecture: AVR Core Sub-Architecture: megaAVR Silicon Core Number: ATmega328